Ac Driver Pcb; Before Removing The Ac Driver Pcb; Removing The Ac Driver Pcb; All Night Power Supply Pcb - Canon iR3245 Series Service Manual

Chapter 10
4) Disconnect the 2 connectors [1].
5) Remove the FAX unit [1] in the direction of the arrow.
- 4 screws (RS tightening; M3X8.5) [2]
[4]
[3]
[2]
[2]
[1]
Points to Note At Mounting
Be sure to hook the FAX unit [1] on the 2 claws [3], fit the 2 locations of
emboss [4], and then tighten the screws.

10.5.12 AC Driver PCB

10.5.12.1 Before Removing the AC Driver PCB

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover. (page 10-17)Reference[Removing the
Upper Rear Cover]
2) Remove the lower rear cover. (page 10-17)Reference[Removing the
Lower Rear Cover]

10.5.12.2 Removing the AC Driver PCB

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
10-30
[1]
F-10-76
[4]
[3]
F-10-77
1) Remove the screw [1] and the Environment heater outlet [2].
2) Remove the AC driver PCB [3].
- 3 wire saddles [1] (removing the harness)
- 3 edge saddles [2] (removing the harness)
- 15 connectors [4]
- 5 screws (w/washer) [5]
[5]
[2]
[1]
[2]
[5]

10.5.13 All Night Power Supply PCB

10.5.13.1 Before Removing the All-Night Power Supply
PCB
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover. (page 10-17)Reference[Removing the
Upper Rear Cover]
2) Remove the lower rear cover. (page 10-17)Reference[Removing the
Lower Rear Cover]

10.5.13.2 Removing the All-Night Power Supply PCB

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
0019-3606
0019-3608
[1]
F-10-78
[3] [4] [1]
[5]
F-10-79
[2]
[5]
[2]
[1]
[5]
0019-3595
0018-9954