Canon iR3245 Series Service Manual page 504

Chapter 17
Item Level
SORTER 1
NIB 1
PS/PCL 1
SDL-STCH 1
MN-CONT 1
DIAG-DVC 1
17-6
COPIER>DISPLAY>VERSION
Description
Title Firmware version of finisher controller PCB
Purpose Check the firmware version of finisher controller PCB.
Note -
Displays, settings and 0xXXYY
adjustment ranges
Unit -
Appropriate guideline -
Related service modes -
Additional description and -
notes
Title Version of Network software
Purpose Check the version of network software.
Note -
Displays, settings and 0xXXYY
adjustment ranges
Unit -
Appropriate guideline -
Related service modes -
Additional description and -
notes
Title Version of UFR board (PS/PCL)
Purpose Printer board (PS/PCL) ROM version. BW type: this mode is not used with BW3 model or later (Not
displayed on UI). [PDL-TYPE] substitute for this.
Note -
Displays, settings and 2
adjustment ranges
Unit xx.yy (xx: version number, yy: development management number)
Appropriate guideline -
Related service modes -
Additional description and -
notes
Title ROM version of saddle stitcher controller PCB
Purpose ROM version of saddle stitcher controller PCB
Note -
Displays, settings and 2
adjustment ranges
Unit 0xXXYY
Appropriate guideline -
Related service modes -
Additional description and -
notes
Title Firmware version of main controller PCB
Purpose Check the firmware version of main controller PCB.
Note -
Displays, settings and 0xXXYY
adjustment ranges
Unit -
Appropriate guideline -
Related service modes -
Additional description and -
notes
Title ROM version of card reader D1/NE controller A1
Purpose ROM version of card reader D1/NE controller A1
Note -
Displays, settings and 2
adjustment ranges
Unit 0xXXYY
Appropriate guideline -
Related service modes -
Additional description and -
notes