Canon iR3245 Series Service Manual page 588

Chapter 17
Item Level
ADRS-BK 1
CNT-MCON 1
CNT-DCON 1
OPTION 1
17-90
COPIER > FUNCTION > CLEAR
Description
Title Clearing the address book data
Purpose When clearing the address book data
Note The address book data is cleared after turning off/on the main power switch.
Displays, settings and -
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select this item and press the OK key.
method 2) Turn off/on the main power switch.
OK/NG criteria -
Time required -
Related service modes -
Additional description and -
notes
Title Clearing the counter for servicing counted in the main controller PCB (main)
Purpose When clearing the counter for servicing counted in the main controller PCB (main)
Note The counter value is cleared after pressing the OK key.
(For the counters to clear, see the section of COUNTER mode.)
Displays, settings and -
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select this item and press the OK key.
method
OK/NG criteria -
Time required -
Related service modes COUNTER
Additional description and -
notes
Title Clearing the counter for various services counted in the DC controller PCB
Purpose When clearing the counters for various services counted in the DC controller PCB (FIN-STPR, FIN-
PDDL, SADDLE, STPL)
Note The counter value is cleared after pressing the OK key.
Displays, settings and -
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select this item and press the OK key.
method
OK/NG criteria -
Time required -
Related service modes COPIER > COUNTER > DRBL-2 > FIN-STPR (level 1)
COPIER > COUNTER > DRBL-2 > FIN-PDDL (level 1)
COPIER > COUNTER > DRBL-2 > SADDLE (level 1)
COPIER > COUNTER > DRBL-2 > STPL (level 1)
Additional description and -
notes
Title Mode to return the setting in service mode (OPTION) to the default (the value at RAM clear)
Purpose When returning the setting in service mode (OPTION) to the default (the value at RAM clear)
Note The setting is cleared after pressing the OK key.
The data to clear is the data on the main controller, the DC controller, and the reader controller.
Displays, settings and -
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Make prints for the contents of service mode in COPIER > FUNCTION > MISC-P > P-PRINT.
method 2) Select this item and press the OK key.
OK/NG criteria -
Time required -
Related service modes COPIER > FUNCTION > MISC-P > P-PRINT (level 1)
Additional description and -
notes