Duplex Feed Sensor - Canon iR3245 Series Service Manual

Chapter 8
3) Remove the duplex feed motor [3].
- 1 timing belt [1]
- 2 screws [2]
[3]
[1]

8.8.25 Duplex Feed Sensor

8.8.25.1 Before Removing the Duplex Feed Sensor
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the rear right cover. (page 10-16)Reference[Removing the
Rear Right Cover]
2) Remove the right cover. (page 10-37)Reference[Removing the Right
Cover]
8.8.25.2 Removing the Duplex Feed Sensor
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the 2 screws (with color) [1] to remove the transfer frame [2].
2) Disconnect the connector [1] to remove the duplex feed sensor [2].
8-44
[2]
F-8-93
F-8-94
F-8-95
8.8.26 Duplex Feed Clutch
8.8.26.1 Before Removing the Duplex Feed Clutch (iR
3225)
iR3225 / iR3225N
1) Remove the upper rear cover. (page 10-17)Reference[Removing the
Upper Rear Cover]
2) Remove the lower rear cover. (page 10-17)Reference[Removing the
Lower Rear Cover]
8.8.26.2 Removing the Duplex Feed Clutch (iR 3225)
iR3225 / iR3225N
1) Remove the fixing plate [5].
- 1 edge saddle [1] (removing the harness)
- 1 connector [2]
- 1 screw [3]
- 1 bushing [4]
0018-9879
[1]
[2]
0018-9880
2) Remove the duplex feed clutch [1].
[1]
8.8.27 Delivery Assembly 1
8.8.27.1 Before Removing the Delivery Unit 1
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the front cover unit. (page 10-17)Reference[Removing the
Front Cover Unit]
2) Remove the delivery tray. (page 10-14)Reference[Removing the Deliv-
ery Tray]
3) Remove the support cover. (page 10-15)Reference[Removing the Sup-
port Cover]
4) Remove the delivery tray rear cover. (page 10-14)Reference[Removing
the Delivery Tray Rear Cover]
5) Remove the rear right cover. (page 10-16)Reference[Removing the
Rear Right Cover]
6) Release the right cover. (page 10-36)Reference[Releasing the Right
Cover]
7) Remove the 3 way unit. (page 8-41)Reference[Removing the 3 Way
Unit]
[5]
[3] [4]
F-8-96
F-8-97
0018-9881
0018-9882
0018-9885