Canon iR3245 Series Service Manual page 357

2) Select [System Management] tab > [Utility] tab > [Application Management Function] tab.
3) Enter a check mark against the SMS Installer Service (Remote Login Service Authentication) radio button and click on either Start or Stop. Check that the status
has changed accordingly.
4) Log out and then log in again and access via the RLS authentication login window.
When RLS authentication has been set to Start, the RLS entry window will now be displayed. If RLS authentication has been set to Stop, when an attempt is
made to log in, the error message shown below will be displayed and login will not be possible.
RLS authentication started
F-11-12
F-11-13
F-11-14
RLS authentication stopped
Chapter 11
11-11