Before Removing The 24V Power Supply Pcb - Canon iR3245 Series Service Manual

7) Remove the 12V power supply PCB [1].
- 4 screws [2]
- 1 PCB support [3]
[2]

10.5.3.3 Before Removing the 24V Power Supply PCB

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover. (page 10-17)Reference[Removing the
Upper Rear Cover]
2) Remove the lower rear cover. (page 10-17)Reference[Removing the
Lower Rear Cover]
10.5.3.4 Removing the 24V Power Supply PCB
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
(Perform the same procedure from step 1 to 5 as in 'Removing the 12V Power
Supply PCB'.) (page 10-24)Reference[Removing the 12V Power Supply
PCB]
1) Remove the 24V power supply PCB [1].
- 4 screws [2]
- 1 PCB support [3]
[2]
10.5.4 Control Panel
10.5.4.1 Removing the Control Panel Unit
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
[1]
[3]
F-10-57
[1]
[3]
F-10-58
1) Remove the rubber cap [1], and remove the screw [2].
[2]
2) Press the release button [1] and open the right cover [2].
0019-3690
0019-3691
[2]
3) Remove the 2 screws [1].
[1]
0018-9942
[1]
[2]
F-10-59
[1]
F-10-60
F-10-61
Chapter 10
[2]
10-25