Canon iR3245 Series Service Manual page 663

Item Level Description
PPR-SLCT 1 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
MOD-SLCT 1 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
ENV-SLCT 1 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
T-17-77
COPIER > OPTION > COMBO
Setting switch for weak bias at the lead edge of transfer destination (paper type)
-
-
1: Plain paper, 2: Thick paper, 3: Envelope, 4: Tracing paper, 5: OHP, 6: Postcard, 7: Label, 8: Bond
paper
-
1
-
COPIER > OPTION > COMBO > PPR-SLCT (Level 1)
COPIER > OPTION > COMBO > MOD-SLCT (Level 1)
COPIER > OPTION > COMBO > ENV-SLCT (Level 1)
COPIER > ADJUST > HV-TR > TR-TP-TM (Level 1)
COPIER > ADJUST > HV-TR > TR-TP-LV (Level 1)
The weak bias at the lead edge of transfer destination is enabled by making the following settings.
1: Output condition: Make the settings of "COPIER > OPTION > COMBO > (1)PPR-SLCT(paper
type) / (2)MOD-SLCT(pickup mode) / (3)ENV-SLCT(selection of environment)" and register them
in TR-SW1 to 5.
2: Make the settings of "COPIER > ADJUST > HV-TR > (1)TR-TP-TM (application time) / (2)TR-
TP-LV (application level)".
Setting switch for weak bias at the lead edge of transfer destination (pickup mode)
-
-
1: Single-sided, 2: 2nd page of double-sided printing (paper picked up from a cassette), 3: 2nd page of
double-sided printing (paper picked up from manual feed tray)
-
1
-
COPIER > OPTION > COMBO > PPR-SLCT (Level 1)
COPIER > OPTION > COMBO > MOD-SLCT (Level 1)
COPIER > OPTION > COMBO > ENV-SLCT (Level 1)
COPIER > ADJUST > HV-TR > TR-TP-TM (Level 1)
COPIER > ADJUST > HV-TR > TR-TP-LV (Level 1)
The weak bias at the lead edge of transfer destination is enabled by making the following settings.
1: Output condition: Make the settings of "COPIER > OPTION > COMBO > (1)PPR-SLCT(paper
type) / (2)MOD-SLCT(pickup mode) / (3)ENV-SLCT(selection of environment)" and register them
in TR-SW1 to 5.
2: Make the settings of "COPIER > ADJUST > HV-TR > (1)TR-TP-TM (application time) / (2)TR-
TP-LV (application level)".
Setting switch for weak bias at the lead edge of transfer destination (selection of environment)
-
-
1: Low humidity
2: Rather low humidity
3: Normal humidity
4: Rather high humidity
5: High humidity
-
3
-
COPIER > OPTION > COMBO > PPR-SLCT (Level 1)
COPIER > OPTION > COMBO > MOD-SLCT (Level 1)
COPIER > OPTION > COMBO > ENV-SLCT (Level 1)
COPIER > ADJUST > HV-TR > TR-TP-TM (Level 1)
COPIER > ADJUST > HV-TR > TR-TP-LV (Level 1)
The weak bias at the lead edge of transfer destination is enabled by making the following settings.
1: Output condition: Make the settings of "COPIER > OPTION > COMBO > (1)PPR-SLCT(paper
type) / (2)MOD-SLCT(pickup mode) / (3)ENV-SLCT(selection of environment)" and register them
in TR-SW1 to 5.
2: Make the settings of "COPIER > ADJUST > HV-TR > (1)TR-TP-TM (application time) / (2)TR-
TP-LV (application level)".
Chapter 17
17-165