Copier > Function > Part-Chk - Canon iR3245 Series Service Manual

Chapter 17
Item Level
KEY-CHK 1
TOUCHCHK 1
- Input key and screen display of KEY-CHK
17.5.1.9 COPIER > FUNCTION > PART-CHK
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
CL 1
17-86
COPIER > FUNCTION > PANEL
Description
Title Key input check
Purpose - Check key input on the control panel.
- When replacing the LCD unit
Note -
Settings/Adjustment range -
Unit -
Setting/Adjustment/Operation 1) Select (highlight) the item to display the input box.
method 2) Press the key on the control panel to display the input value.
See the following chart (KEY-CHK input key and screen display).
3) After checking, press the item to cancel highlighting to stop the operation.
OK/NG criteria -
Time required -
Related service modes -
Additional description and -
notes
Title Adjusting the coordinate position on the analog touch panel
Purpose - Adjust the coordinate position on the analog touch panel.
- When replacing the LCD unit
Note -
Settings/Adjustment range -
Unit -
Setting/Adjustment/Operation 1) Select (highlight) the item and press the OK key.
method 2) Press the 9 locations of '+' displayed sequentially on the touch panel in the order to complete the
adjustment.
OK/NG criteria -
Time required -
Related service modes -
Additional description and -
notes
Key
0 to 9, #, *
Reset
Stop
User mode
Start
Power save
Clear
PIN
Help
Counter check
COPIER > FUNCTION > PART-CHK
Description
Title Specifying a clutch for operation check
Purpose To check the operation of the clutch
Note -
Displays, settings and 1 to 6
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select (highlight) the item, input the setting, and then press the OK key.
method 2) Turn off/on the main power switch.
OK/NG criteria -
Time required -
Related service modes COPIER > FUNCTION > PART-CHK > CL-ON (level 1)
Additional description and -
notes
T-17-40
Display on screen
0 to 9, #, *
RESET
STOP
USER
START
STAND BY
CLEAR
ID
?
BILL
T-17-41
0019-9300