Copier > Option > Body (8/15) - Canon iR3245 Series Service Manual

Chapter 17
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
NS-LGN 2
MEAP-PN 2
17.6.1.8 COPIER > OPTION > BODY (8/15)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
SVMD-ENT 2
17-116
COPIER > OPTION > BODY
Description
Title Restriction on use of LOGIN authentication during SMTP authentication
Purpose of use, When used Restrict the use of LOGIN authentication during SMTP authentication.
Precautions for use -
Settings and adjustment 0: Dependent upon the SMTP server
ranges 1: Not used
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and SMTP authentication has the specifications of SMTP (Simple Mail Transfer Protocol), a protocol used
notes for mail transmission, plus a user authentication function. When mail is received, the user account and
password are authenticated between the SMTP server and user, and mail transmission is permitted
only when the account and password have been authenticated.
Title Change of the HTTP port number of MEAP application
Purpose of use, When used Change the HTTP port number of the MEAP application
Precautions for use Do not use port number"8080" when Print Server is connected.
If the port is used, you can not see the page for RUI of the device with MEAP authentication
application.
(port "8080" is reserved for redirecting from EFI controller to device. )
Settings and adjustment 0 to 65535
ranges
Unit -
Value at time of shipment 8000
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
COPIER > OPTION > BODY
Description
Title Switching of procedure for establishing service mode
Purpose of use, When used Switch the procedure for establishing the service mode in order to prevent the leakage of information.
Precautions for use -
Settings and adjustment 0: [Initial settings/registration]-> Press [2] and [8] at the same time. -> [Initial settings/registration]
ranges 1: [Initial settings/registration]]-> Press [4] and [9] at the same time. -> [Initial settings/registration]
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
T-17-57
0019-9607