Canon iR3245 Series Service Manual page 625

The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description
PT3-INEX 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
IFX-CHIG 1 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
USB-RCNT 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
T-17-62
COPIER > OPTION > BODY
Enable switch for paper brand Type 3 import/export
Enable the paper brand Type 3 information to be handled by the following functions:
- Import/export using remote UI
- Distribution of equipment information
- Import/export from iWEMC
-
0: Not enabled
1: Enabled
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
-
Setting of operation by number of characters in iFAX incoming mail text
To ensure that mail text during iFAX reception is not printed or transmitted when it has fewer
characters than the number set.
Mail text consisting solely of the carriage return codes is sometimes sent by an another machine, and
the machine will print a blank sheet in a case like this. The printing of blank sheets can be eliminated
when a value of '2' or so is set for this item. However, users should be urged to exercise caution since
mail text containing fewer the number of characters than the number set will no longer be printed.
0 to 999
0: No mail text is ignored.
Number of characters
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
- Concerning operation when a setting other than '0' is used
If the incoming mail is determined to have no main text and no attached TIFF files are present, one
page bearing only headers and footers will be printed and transmitted.
- Chinese characters ('kanji') are calculated at the rate of 2 bytes per character, and the carriage return
codes and other control codes are included in the number of characters.
Automatic connection setting during USB device disconnection
Set whether to initiate automatic connection when USB devices are disconnected.
If this item is set to '1' and a USB hub is provided, all the devices will be re-connected when one of
them has been disconnected.
0: No automatic connection
1: Automatic connection
When this item is set to '0', a USB device cannot be used once it has been removed. To re-connect the
device, the power of the machine must be set to OFF and then back ON.
When this item is set to '1', a USB device can be automatically re-connected even when it has been
removed and re-installed.
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
-
Chapter 17
17-127