Sub Hopper; Before Removing The Sub Hopper; Removing The Sub Hopper - Canon iR3245 Series Service Manual

Chapter 7

7.12.4 Sub Hopper

7.12.4.1 Before Removing the Sub Hopper

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the toner container.
2) Remove the front cover unit. (page 10-17)Reference[Removing the
Front Cover Unit]
3) Remove the waste toner container. (page 7-24)Reference[Removing the
Waste Toner Container]
4) Remove the toner container cover. (page 10-18)Reference[Removing
the Toner Container Cover]
5) Remove the delivery tray. (page 10-14)Reference[Removing the Deliv-
ery Tray]
6) Remove the left cover. (page 10-17)Reference[Removing the Left Cov-
er]
7) Remove the inside base cover. (page 10-16)Reference[Removing the
Inside Base Cover]
8) Remove the inside right cover. (page 10-16)Reference[Removing the
Inside Right Cover]
9) Remove the drum unit. (page 7-18)Reference[Removing the Drum
Unit]
10) Remove the developing assembly. (page 7-21)Reference[Removing
the Developing Assembly]
11) Remove the pre-exposure lamp. (page 7-18)Reference[Removing the
Pre-Exposure Lamp]
12) Remove the laser scanner unit. (page 6-8)Reference[Removing the La-
ser Unit]
13) Remove the hopper unit. (page 7-19)Reference[Removing the Hopper
Unit]
14) Remove the toner feed screw motor. (page 7-25)Reference[Removing
the Toner Feed Screw Motor]

7.12.4.2 Removing the Sub Hopper

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the 2 screws [2] behind the sub hopper [1].
7-20
F-7-28
2) Check the phase of the gear [1] shown in the figure.
0018-9797
3) Remove the 3 screws [1].
4) Free the cable from the edge saddle [1].
0018-9798
5) Remove the screw [1] to release the arm [2].
F-7-29
F-7-30
F-7-31
F-7-32