Manual Pick-Up Clutch; Before Removing The Manual Feed Pickup Clutch (Ir 3245/3235/3230); Removing The Manual Feed Pickup Clutch (Ir 3245/3235/3230); Before Removing The Manual Feed Pickup Clutch (Ir 3225) - Canon iR3245 Series Service Manual

Chapter 8
[1]
2) Removing the screw [1] and remove the manual feeder pad up/down so-
lenoid [2].
[2]
Points to Note When Installing the Manual Feeder Pad Up/Down
Solenoid
Be sure to hook the arm [1] of the manual feeder pad up/down solenoid on
the protrusion [2] of the gear.
[2]

8.8.17 Manual Pick-up Clutch

8.8.17.1 Before Removing the Manual Feed Pickup
Clutch (iR 3245/3235/3230)
iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover. (page 10-17)Reference[Removing the
Upper Rear Cover]
2) Remove the lower rear cover. (page 10-17)Reference[Removing the
Lower Rear Cover]
8-40
[2]
[1]
F-8-74
[1]
8.8.17.2 Removing the Manual Feed Pickup Clutch (iR
3245/3235/3230)
iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the fixing plate [6].
- 1 edge saddle [1] (removing the harness)
- 1 connector [2]
- 2 screws [3]
- 1 bushing [4]
- 1 bear ring [5]
[3]
[4]
[2]
[1]
2) Remove the screw [1] and remove the cover [2].
[2]
[1]
3) Remove the manual feed pickup clutch [1].
[1]
8.8.17.3 Before Removing the Manual Feed Pickup
Clutch (iR 3225)
iR3225 / iR3225N
1) Remove the upper rear cover. (page 10-17)Reference[Removing the
Upper Rear Cover]
2) Remove the lower rear cover. (page 10-17)Reference[Removing the
Lower Rear Cover]
3) Remove the main motor. (page 10-35)Reference[Removing the Main
0018-9865
Motor (iR 3225)]
8.8.17.4 Removing the Manual Feed Pickup Clutch (iR
3225)
iR3225 / iR3225N
[6] [3] [5]
F-8-75
F-8-76
F-8-77
0018-9867
0019-8362
0019-8363