2) If the wrong password is entered, the following window is displayed. The user's system administrator may have changed the password, so confirm the password

with the system administrator. Note that there is no special password for service.

Login without using the SMS login window but by entering the user ID and password for authentication in the RLS (Remote Login Service) window. The user

information (user name and password) used is the information for domain authentication or local device authentication. The login procedures are as follows.

1) Access SMS by RLS Authentication from the PC browser on the same network as the MEAP device.

URL: http://<IP address of MEAP device>:8000/sms/rls/

Ex.) http://172.16.188.240:8000/sms/rls

MEMO:

- When the device authentication method used is domain authentication, enter the user name, password and login destination registered with Active Directory and

then click 'Log In'.

- If the authentication method used is local device authentication, enter the user name, password and login destination registered in the device and click 'Log In'.

- When using SDL as the login service, enter the user information registered in the device, as per local device authentication.

- Only the following users may us SMS via RLS.

- In the case of domain authentication, users belonging to the Canon Peripheral Admins Group.

- In the case of local device authentication, users registered with Administrator privileges.

In the case the device authentication method is SSO

F-11-4

F-11-5

Chapter 11

11-7

Table of Contents