The mode during operations or when an operation is ready to start. All power supplies are provided.
2. Sleep mode
2-1. Sleep 1
The state that the light of the control panel is turned off and the laser scanner motor (M1) does not rotate by pushing the control panel key. The power supply state
is the same as for standby mode.
2-2. Sleep 3
Only 3 VB for the all-night power supply PCB is being provided.
When either of the following jobs occurs, sleep 3 mode is turned into standby mode.
- Print job
- Holding down the control panel power switch
- Receiving FAX
The diagram below shows the range that current is applied to at sleep 3 mode.
Scanner assembly
3. AC off mode
The state that the main power switch is turned off. All power supplies and heater control are turned off.