Canon iR3245 Series Service Manual page 96

Chapter 2
[2] [2]
[2]
11) Remove the environment heater switch cover [1].
When turning detaching the environment heater switch cover [1], use a
flatblade screwdrivers.
2-28
[1]
[2]
[2]
F-2-111
[1]
F-2-112
[1]
12) Remove the AC driver PCB from the host machine and replace it with
the new AC driver PCB [1].
When replacing the AC driver PCB, be sure to make a note of the position
of the connector and to connect the connector to the original position.
- 3 wire saddles [2]
- 3 edge saddles [3]
- 9 connectors [4]
- 5 screws (w/washer) [5]
Before replacing the AC driver PCB
[1]
[5]
[3]
[2]
[3]
[5]
[4]
[4] [2]
[5]
F-2-113
[5]
[3]
[2]
[5]