Copier > Option > Body (2/15) - Canon iR3245 Series Service Manual

Chapter 17
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
TRANS-SW 1
TEMP-CON 1
17.6.1.2 COPIER > OPTION > BODY (2/15)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
PRIAC-SW 1
17-104
COPIER > OPTION > BODY
Description
Title Switching of the transfer high-voltage control mode from fixed current control mode to fixed voltage
control mode
Purpose of use, When used Switch the transfer high-voltage control mode from fixed current control mode to fixed voltage control
mode.
Precautions for use -
Settings and adjustment 0: Do not switch the mode.
ranges 1: Fixed voltage mode 1
2: Fixed voltage mode 2
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Switching of the fixing temperature mode (for thick paper)
Purpose of use, When used Switch the fixing temperature mode for thick paper.
Precautions for use -
Settings and adjustment 0: OFF
ranges 1: Priority is given to productivity. The controlled temperature is fixed at -10degC.
2: The controlled temperature is fixed at -6degC.
3: The controlled temperature is fixed at -3degC.
4: Priority is given to fixing performance. The controlled temperature is fixed at +3degC.
5: The controlled temperature is fixed at +6degC.
6: The controlled temperature is fixed at +10degC.
7: The controlled temperature is fixed at +15degC.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > OPTION > BODY > FIX-TEMP (Level 1)
Additional description and This item can be used with the setting of FIX-TEMP.
notes Example)
When "FIX-TEMP=-6degC, TEMP-CON=-6degC" is set, the controlled temperature is offset at -
12degC.
COPIER > OPTION > BODY
Description
Title Mode of measures for drum charging failure
Purpose of use, When used Use this item when an image failure occurs due to drum charging failure.
Precautions for use The setting value is cleared to 0 in the following cases.
- when APVC is executed after a new drum unit is installed
- when COPIER > FUNCTION > DPC > D-GAMMA is executed
Settings and adjustment 0: Default
ranges 1: +50 uA
2: +100 uA
Unit uA
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > FUNCTION > DPC > D-GAMMA (Level 1)
Additional description and -
notes
T-17-51
0019-9600