Canon iR3245 Series Service Manual page 590

Chapter 17
Item Level
SND-STUP 2
CA-KEY 2
LANG-ERR 1
17-92
COPIER > FUNCTION > CLEAR
Description
Title Clearing the name of transmission reading settings
Purpose When switching the language setting
Note The transmission reading setting is cleared after turning off/on the main power switch.
Displays, settings and -
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select this item and press the OK key.
method 2) Turn off/on the main power switch.
OK/NG criteria -
Time required -
Related service modes -
Additional description and -
notes
Title Deleting both the CA certificate and key pair
Purpose When service technicians replace or dispose the device
Note If a service technician replaces or disposes the device, delete both the CA certificate and key pair. The
CA certificate is used for the MEAP application using E-RDS, SSL client connection. The key pair is
used in IPP, RUI, and MEAP SSL function.
- Without this operation at replacing or disposing the device, the CA certificate and key pair
additionally registered by a user remain in the HDD, which may cause security issues. Therefore, the
service technicians must perform this operation surely.
- After performing the operation, be sure to check that OK is displayed. If NG is displayed, the CA
certificate and key pair may have not been deleted correctly; and therefore, they must be deleted surely
by such methods as initializing the HDD.
- This operation deletes the server certificate and key pair of SSL additionally registered by a user,
and should not be executed carelessly. If they are accidentally deleted, the user needs to reinstall a SSL
server certificate. If the user has not executed additional install.
Displays, settings and -
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select this item and press the OK key.
method 2) If clearing is normally executed, OK is displayed.
3) Turn off/on the main power switch.
OK/NG criteria -
Time required -
Related service modes -
Additional description and Turning off/on the power supply decrypts the CA certificate and key pair registered as factory settings
notes from the archive (/BOOTDEV/KCMNG) and enables the abovementioned function (E-RDS/SSL
function).
Title Clearing language-related errors
Purpose of use If an error code related to languages occurs after setting other language than the default, execute this
item to recover. (The recovery operation changes the language into the default).
Situation -
Note -
Displays, settings and -
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select this item and press the OK key.
method
OK/NG criteria -
Time required -
Related service modes -
Additional description and -
notes