Canon iR3245 Series Service Manual page 585

Item Level Description
CL-ON 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
MTR 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
MTR-ON 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
SL 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
COPIER > FUNCTION > PART-CHK
Starting operation check of the clutch
When operating the clutch specified in COPIER > FUNCTION > PART-CHK>CL
-
-
-
1) Select the item and press the OK key to turn on/off in the following pattern.
ON for 0.5 sec -> OFF for 10 sec -> ON for 0.5 sec -> OFF for 10 sec -> ON for 0.5 sec -> OFF
-
-
COPIER > FUNCTION > PART-CHK > CL (level 1)
-
Specifying a motor for operation check
To check the operation of the motor
-
1 to 58 (For details, see the chart shown later.)
-
1) Select (highlight) the item.
2) Input the code of the motor with keypad.
3) Press the OK key.
4) Press MTR-ON to check the operation.
-
-
COPIER > FUNCTION > PART-CHK > MTR-ON (level 1)
-
Starting the operation of the motor
When operating the clutch specified in COPIER > FUNCTION > PART-CHK>MTR
Be sure to check the operation of the bottle motor after removing the toner container.
(Operation check performed with the toner container installed may cause toner leak in the machine.)
-
-
1) Select the item and press the OK key to repeat ON/OFF in the following pattern.
ON for 5 sec -> Complete
- ON for 10 sec for the hopper stirring motor and the horizontal registration motor -> OFF
- The shift tray motor stops at the front/rear HP.
-
-
COPIER > FUNCTION > PART-CHK > MTR (level 1)
-
Specifying a solenoid for operation check
To start the operation of the solenoid
-
1 to 2
1: Primary fixing web solenoid
2: Secondary fixing web solenoid
-
1) Select (highlight) the item.
2) Input the code of the solenoid with keypad.
3) Press the OK key.
4) Press SL-ON and check the operation.
-
-
COPIER > FUNCTION > PART-CHK > SL-ON (level 1)
-
Chapter 17
17-87