Canon iR3245 Series Service Manual page 566

Chapter 17
Item Level
TR-DUP3 2
TR-DUP4 2
TR-DUP5 2
TR-DUP6 2
TR-DUP7 2
17-68
COPIER > ADJUST > HV-TR
Description
Title 1st sided/2nd sided item at secondary transfer offset adjustment
Purpose 1st sided/2nd sided item at secondary transfer offset adjustment
Note -
Settings/Adjustment range 1: 1-sided, 2: auto 2-sided, 3: multi 1-sided, 4: multi 2-sided
Unit -
Amount of change per unit -
Value at RAM clear/ 1/No
adjustment at factory
shipment
Setting/Adjustment/ 1) Select the item to be highlighted to enter the setting value, and then press OK key.
Operation method 2) Turn OFF and then ON the main power switch.
Relevant Service Mode COPIER > ADJUST > HV-TR > TR-TGT3
Supplementary info/Memo -
Title 1st sided/2nd sided item at secondary transfer offset adjustment
Purpose 1st sided/2nd sided item at secondary transfer offset adjustment
Note -
Settings/Adjustment range 1: 1-sided, 2: auto 2-sided, 3: multi 1-sided, 4: multi 2-sided
Unit -
Amount of change per unit -
Value at RAM clear/ 1/No
adjustment at factory
shipment
Setting/Adjustment/ 1) Select the item to be highlighted to enter the setting value, and then press OK key.
Operation method 2) Turn OFF and then ON the main power switch.
Relevant Service Mode COPIER > ADJUST > HV-TR > TR-TGT4
Supplementary info/Memo -
Title 1st sided/2nd sided item at secondary transfer offset adjustment
Purpose 1st sided/2nd sided item at secondary transfer offset adjustment
Note -
Settings/Adjustment range 1: 1-sided, 2: auto 2-sided, 3: multi 1-sided, 4: multi 2-sided
Unit -
Amount of change per unit -
Value at RAM clear/ 1/No
adjustment at factory
shipment
Setting/Adjustment/ 1) Select the item to be highlighted to enter the setting value, and then press OK key.
Operation method 2) Turn OFF and then ON the main power switch.
Relevant Service Mode COPIER > ADJUST > HV-TR > TR-TGT5
Supplementary info/Memo -
Title 1st sided/2nd sided item at secondary transfer offset adjustment
Purpose 1st sided/2nd sided item at secondary transfer offset adjustment
Note -
Settings/Adjustment range 1: 1-sided, 2: auto 2-sided, 3: multi 1-sided, 4: multi 2-sided
Unit -
Amount of change per unit -
Value at RAM clear/ 1/No
adjustment at factory
shipment
Setting/Adjustment/ 1) Select the item to be highlighted to enter the setting value, and then press OK key.
Operation method 2) Turn OFF and then ON the main power switch.
Relevant Service Mode COPIER > ADJUST > HV-TR > TR-TGT6
Supplementary info/Memo -
Title 1st sided/2nd sided item at secondary transfer offset adjustment
Purpose 1st sided/2nd sided item at secondary transfer offset adjustment
Note -
Settings/Adjustment range 1: 1-sided, 2: auto 2-sided, 3: multi 1-sided, 4: multi 2-sided
Unit -
Amount of change per unit -
Value at RAM clear/ 1/No
adjustment at factory
shipment
Setting/Adjustment/ 1) Select the item to be highlighted to enter the setting value, and then press OK key.
Operation method 2) Turn OFF and then ON the main power switch.
Relevant Service Mode COPIER > ADJUST > HV-TR > TR-TGT7
Supplementary info/Memo -