Sorter; Sorter > Adjust - Canon iR3245 Series Service Manual

Chapter 17
Item Level
DOCST 1
LA-SPEED 1
DOC-LNGH 1

17.4.3 SORTER

17.4.3.1 SORTER > ADJUST
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
17-78
Description
Title Adjusting the original stop position for ADF pickup (original tray pickup)
Purpose To adjust the leading edge margin for ADF pickup
Situation -
Note Delivering the original enables the setting. Be sure to press the OK key to deliver the original.
When changing the setting, input the setting on the main station service label.
Settings/Adjustment range - 7 to + 7
Unit mm
Amount of change per unit 0.5mm
Value at RAM clear/ 0/none
adjustment at factory
shipment
Setting/Adjustment/Operation
method The larger the value, the smaller the leading edge margin.
Relevant Service Mode -
Supplementary info/Memo
Title Adjusting the original feeding speed in stream reading
Purpose of use To adjust the original feeding speed in stream reading mode
The larger the setting, the faster the speed (the image reduced).
Precautions for use When changing the setting, input the setting on the main station service label.
Displays, settings and - 30 to + 30
adjustment ranges
Unit %
Amount of change per unit 0.10%
Value at RAM clear 0
Value at RAM clear/ 0/none
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select (highlight) the item, input the setting, and then press the OK key.
method The larger the setting, the faster the speed (the image reduced).
The smaller the setting, the slower the speed (the image extended).
2) Turn off/on the main power switch.
Relevant Service Mode -
Supplementary info/Memo -
Title Correcting the paper length in extra length/indeterminate mode with ADF
Purpose of use When installing the ADF (to correct errors in detecting the paper length in extra length/indeterminate
mode with ADF)
Precautions for use -
Displays, settings and - 100 to 100
adjustment ranges
Unit mm
Amount of change per unit 0.1
Value at RAM clear/ 0/none
adjustment at factory
shipment
Setting/Adjustment/Operation
method
Relevant Service Mode -
Supplementary info/Memo -
T-17-30
FEEDER > ADJUST >
0019-9311