Copier > Function > Panel - Canon iR3245 Series Service Manual

Item Level
NIP-CHK 1
17.5.1.8 COPIER > FUNCTION > PANEL
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
LCD-CHK 1
LED-CHK 1
LED-OFF 1
COPIER > FUNCTION > FIXING
Description
Title Output for auto measurement of fixing nip width
Purpose When checking the fixing nip width
Note This equipment does not perform the adjustment of nip width. This item is used only for checking the
nip width.
Displays, settings and -
adjustment ranges
Unit -
Value at RAM clear -
Setting/Adjustment/Operation 1) Execute solid black print with a sheet of A4/LTR size paper.
method 2) Execute print of approx. 20 sheets of A4 size test sheets.
3) Set the solid black paper of A4/LTR size created in step 1 on the manual feed tray with its solid
black side facing down.
4) Select service mode and press the OK key. (Papers on the manual feed tray are fed).
5) The fed paper being caught in the fixing roller stops; and then it is delivered in approx. 10 sec.
6) Check to see that the nip width of the delivered paper is within the standard.
OK/NG criteria 7.6 to 10.6 mm
Time required -
Related service modes -
Additional description and -
notes
COPIER > FUNCTION > PANEL
Description
Title Checking dots on the LCD
Purpose - When checking the dots on the LCD
- When replacing the LCD unit
Note -
Settings/Adjustment range -
Unit -
Setting/Adjustment/Operation 1) Select this item and press the OK key to start the operation. The whole touch panel screen is
method activated in white - black - red - green - blue in this order. (Check it.)
2) Press the stop key to stop the operation.
OK/NG criteria -
Time required -
Related service modes -
Additional description and -
notes
Title Starting the check of LED activation on the control panel
Purpose - When checking LED activation on the control panel
- When replacing the LCD unit
Note -
Settings/Adjustment range -
Unit -
Setting/Adjustment/Operation Select (highlight) the item and press the OK key.
method The LED on the control panel is activated in the order.
Press LED-OFF to stop it.
OK/NG criteria -
Time required -
Related service modes COPIER > FUNCTION > PANEL > LED-OFF (level 1)
Additional description and -
notes
Title Stopping LED activation check on the control panel
Purpose To stop the LED activation check on the control panel during executing LCD-CHK
Note -
Settings/Adjustment range -
Unit -
Setting/Adjustment/Operation Press this item during the execution of LED-CHK.
method
OK/NG criteria -
Time required -
Related service modes COPIER > FUNCTION > PANEL > LED-CHK (level 1)
Additional description and -
notes
T-17-38
T-17-39
Chapter 17
0019-9299
17-85