Canon iR3245 Series Service Manual page 652

Chapter 17
Item Level
MAIL-OF 1
IFAX-OF 1
LDAP-DEF 1
FREE-DSP 2
17-154
COPIER > OPTION > USER
Description
Title Switch for prohibiting transmission to email destinations
Purpose of use, When used Prohibit transmission to email destinations by prohibiting the input of email addresses from the
address book.
Precautions for use Email addresses which are already registered must be deleted manually since it is still possible to use
them even when '1' is set for this item.
Settings and adjustment 0: Transmission to email destinations is not prohibited.
ranges 1: Transmission to email destinations is prohibited.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Switch for prohibiting transmission to i-FAX destinations
Purpose of use, When used Prohibit transmission of i-FAX destinations by prohibiting the input of i-FAX addresses from the
address book.
Precautions for use i-FAX addresses which are already registered must be deleted manually since it is still possible to use
them even when '1' is set for this item.
Settings and adjustment 0: Transmission to i-FAX destinations is not prohibited.
ranges 1: Transmission to i-FAX destinations is prohibited.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Default value selector switch for LDAP server search conditions
Purpose of use, When used Change the default conditions of the search target attributes which are specified when conducting
advanced LDAP server searches.
Precautions for use -
Settings and adjustment 0: 'Name'
ranges 1: 'Email'
2: 'Fax'
3: 'Organization'
4: 'Organization unit'
5: 'To be registered 1' (set as desired by the user)
6: 'To be registered 2' (set as desired by the user)
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > OPTION > USER > LDAP-SW
Additional description and -
notes
Title Switching of charge invalidation display
Purpose of use, When used When there is no hard switch used to select whether to perform charging at the vender's side, it needs
to be controlled by a soft switch. In such a case, this item is used to select whether to display the charge
invalidation screen (soft switch).
Precautions for use -
Settings and adjustment 0: The charge invalidation screen is not displayed.
ranges 1: The charge invalidation screen is displayed.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and -
operation procedures
Related service modes -
Additional description and -
notes