Canon iR3245 Series Service Manual page 119

1. Installation Procedure
1) Install the IP board support plate [2] to the IPSec board [1].
- 2 screws (TP; M3X6) [3]
[1]
2) Remove the face plate [1]. (Do not use the removed face plate.)
- 2 screws [2]
3) Install the IPSec board [1] to the host machine.
- 2 screws [2] (Use the screw removed in step 2.)
4) Insert the power plug into the power outlet.
5) Turn on the main power switch.
2. Checking After Installation
1) Check to see that the IPSec board is recognized.
Service mode >COPIER > DISPLAY > ACC-STS > PCI
When 'IPsec Board' is displayed, the IPSec board is correctly recognized.
[3]
[2]
F-2-220
[1] [2]
F-2-221
[1] [2]
F-2-222
[2]
[2]
Chapter 2
2-51