Canon iR3245 Series Service Manual page 110

Chapter 2
[1]
[1]
[1]
B: In the case that the card reader has been installed on the host
machine
<Right side - 1 location>
[1]
[1]
10) Install the ferrite core [1] to the cable. The installation position [2] should
be at 50 mm from the root of cable. Install it also to the other side in the
same manner.
2-42
F-2-177
F-2-178
11) Insert the cable [2] into the speaker unit [1].
[1]
12) Route the cable [1] through the cable guide [2] and install the cable guide
cover [3].
There should be no excess slack on the cable.
A: In the case that the card reader has not been installed on the host
machine
<Right side>
[3]
B: In the case that the card reader has been installed on the host
machine
<Right side>
[1]
[2]
F-2-179
[2]
F-2-180
[1] [2]
F-2-181