Copier > Display > Cst-Sts - Canon iR3245 Series Service Manual

COPIER > DISPLAY > ANALOG
Item Level
TEMP 1
HUM 1
ABS-HUM 1
DR-TEMP 1
FIX-C 1
FIX-E 1
17.2.1.4 COPIER > DISPLAY > CST-STS
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Description
Title Machine temperature (environment sensor)
Purpose Check the temperature inside the machine.
Note -
Displays, settings and -
adjustment ranges
Unit Deg C
Appropriate guideline Guaranteed environment for main body: temperature 15 deg C to 27.5 deg C, humidity 25% to 75%
Related service modes -
Additional description and Temperature/humidity detected by the environment sensor (left) is not used for the parameter of
notes control.
Title Machine humidity (environment sensor)
Purpose Check the humidity inside the machine.
Note -
Displays, settings and -
adjustment ranges
Unit %RH
Appropriate guideline Guaranteed environment for main body: temperature 15 deg C to 27.5 deg C, humidity 25% to 75%
Related service modes -
Additional description and Temperature/humidity detected by the environment sensor (left) is not used for the parameter of
notes control.
Title Moisture amount (environment sensor)
Purpose Check the amount of moisture.
Note -
Displays, settings and XX.xx
adjustment ranges
Unit g
Appropriate guideline 0 to 20
Related service modes -
Additional description and -
notes
Title Display of the temperature around the photosensitive drum
Purpose To check if a fault in image is attributed to the temperature of the photosensitive drum.
Note If the temperature is not within the standard range (approx 42.5 deg C), change the switch for heater
temperature setting or check the heater function.
Displays, settings and -
adjustment ranges
Unit Deg C
Appropriate guideline Room temperature -/+ alpha (alpha; rise in temperature inside the machine)
Related service modes -
Additional description and -
notes
Title Display of the temperature of the surface of fixing film unit (detected temperature by main thermistor)
Purpose Check the temperature of the surface of fixing roller (detected temperature by main thermistor)
Note -
Displays, settings and -
adjustment ranges
Unit Deg C
Appropriate guideline Room temperature to 240 deg C. Approx. 240 deg C during executing a job.
Related service modes -
Additional description and -
notes
Title Display of the temperature of the surface of fixing film unit (detected temperature by sub thermistor)
Purpose Check the temperature of the surface of fixing roller (detected temperature by sub thermistor)
Note -
Displays, settings and -
adjustment ranges
Unit Deg C
Appropriate guideline Room temperature to 240 deg C. Approx. 240 deg C during executing a job.
Related service modes -
Additional description and -
notes
T-17-3
Chapter 17
0019-9274
17-23