Reader Heater (Option); Removing The Reader Heater (Right); Removing The Reader Heater (Left) - Canon iR3245 Series Service Manual

5.4.10 Reader Heater (option)

5.4.10.1 Removing the Reader Heater (Right)

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1)Open the platen board cover or the ADF.
2)Remove the copyboard glass.
3)Remove the connector [1], and then the cable from the wire saddle [2].
4)Remove the screw [3] and the reader heater (right) [4].
[4]
[3]

5.4.10.2 Removing the Reader Heater (Left)

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Open the platen board cover or the ADF.
2) Remove the copyboard glass.
3) Pull the drive belt (at the front side) [1] in the direction of the arrow and
move the CCD [2] to the position shown in the figure.
[1]
[1]
[2]
F-5-55
[2]
F-5-56
4) Remove the reader heater (left) [1].
-2 wire saddles [2]
-1 connector [3]
-1 screw [4]
0019-4794
[3]
0019-4796
[2] [1]
F-5-57
Chapter 5
[4]
5-27