Chapter 8
Turn the gear to check that the movement is smooth.
8.8.5 Cassette Pick-up Motor 1
8.8.5.1 Before Removing the Cassette Pickup Motor 1
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover. (page 10-17)Reference[Removing the
Upper Rear Cover]
2) Remove the lower rear cover. (page 10-17)Reference[Removing the
Lower Rear Cover]
3) Remove the rear right cover. (page 10-16)Reference[Removing the
Rear Right Cover]
8.8.5.2 Removing the Cassette Pickup Motor 1
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the screw [1] to disconnect the pedestal connector [2].
2) Free the harness from the 3 wire saddles [1] and the 3 edge saddles [1].
- 15 connectors [3]
[2]
[1]
[2]
8-32
[1]
[2]
F-8-41
[3]
[1]
F-8-42
3) Detach the AC driver PCB mounting plate [2].
- 3 screws [1]
0018-9819
0018-9820
4) Free the harness [1] from the 2 wire saddles [2].
5) Remove the 5 screws [1] to detach the power supply cord plate [2].
[2]
[1]
6) Disconnect the 2 connectors [1].
[2]
[1]
[2]
F-8-43
F-8-44
F-8-45
F-8-46