Copier > Option > Body (14/15) - Canon iR3245 Series Service Manual

The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
RMT-CNSL 1
MEAP-PRI 2
17.6.1.14 COPIER > OPTION > BODY (14/15)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
PDLEVCT1 2
COPIER > OPTION > BODY
Description
Title Switching of ON/OFF of MEAP Remote Console
Purpose of use, When used This item is used to acquire FunctionCompose logs. Switch ON/OFF setting of MEAP Remote
Console.
Precautions for use -
Settings and adjustment 0: OFF 1: ON
ranges When acquiring FunctionComposer logs, set this item to '1' and acquire logs by Remote Console.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Change of MEAP task priority
Purpose of use, When used This item is used when increasing MEAP processing performance.
Precautions for use -
Settings and adjustment 0: OFF 1: ON
ranges
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
COPIER > OPTION > BODY
Description
Title Setting of event skipping with PDL continuous jobs
Purpose of use, When used This item is used to set event skipping with PDL continuous jobs.
Precautions for use -
Settings and adjustment 0: No event skipping
ranges 1: Skip target 1
2: Skip target 2
The performance is improved in the ascending order of 0->1->2.
When the COPIER>OPTION>BODY>CT-TIME value has been increased and trouble has occurred
in parts of the screen displays, set this mode to '0' (no event skipping) to eliminate the trouble.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
T-17-63
Chapter 17
0019-9613
17-129