Canon iR3245 Series Service Manual page 615

The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description
ENVP-INT 1 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
SSH-SW 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
RMT-LGIN 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
RE-PKEY 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
U-NAME 2 For future expansion (The setting must not be changed.)
U-PASWD 2 For future expansion (The setting must not be changed.)
COPIER > OPTION > BODY
Setting of history retrieval cycle for temperature/humidity inside machine and fixing roller surface
temperature
This item is used when analyzing trouble. To set the cycle for retrieving
(COPIER>DISPLAY>ENVRNT) the history of the temperature/humidity inside the machine and the
fixing roller surface temperature.
-
0 to 480
1 min
60
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
COPIER > DISPLAY > ENVRNT
-
ON/OFF setting of SSH server function
Set the SSH server function ON and OFF. (used in Japanese machines only; not used in overseas
machines)
-
0: OFF
1: ON
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
SSH=Secure Shell
This program is for logging in to other computers over a network, executing commands for machines
in remote locations and for moving files to other machines. Since the data flowing through the network
is encrypted, series of operations can be performed safely even over the Internet.
ON/OFF setting of remote login operation to SSH server
Select whether to allow remote login to the debug console of the SSH server from a remote host (SSH
client: DA (digital accessory)).
Valid only when the COPIER > OPTION > BODY > SSH-SW(Level 2) setting is '1' (ON).
0: Remote login to the SSH server is not allowed.
1: Remote login to the SSH server is allowed.
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
COPIER > OPTION > BODY > SSH-SW (Level 2)
-
ON/OFF setting of SSH server key regeneration.
Set the regeneration of the server key ON and OFF. (used in Japanese machines only; not used in
overseas machines)
- Valid only when the COPIER > OPTION > BODY > SSH-SW (Level 2) setting is '1' (ON)
- When '1' (regenerate) is set, host machine start up may take about 3 to 4 minutes longer than usual.
See the Additional description and notes.
0: The SSH server pair key is not regenerated at host machine startup.
1: The SSH server pair key is regenerated at host machine startup.
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
COPIER > OPTION > BODY > SSH-SW (Level 2)
When '1' (regenerate) is set, the SSH server host regenerates the pair key (secret key and public key)
when the power is set to OFF and back to ON, and it outputs the key pair and saves it on the hard drive.
It may take about 3 to 4 minutes longer than usual at host machine startup to execute this processing.
Chapter 17
17-117