Copier > Option > Body (7/15) - Canon iR3245 Series Service Manual

Chapter 17
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
DFDST-L2 1
DST-POS 1
17.6.1.7 COPIER > OPTION > BODY (7/15)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
NS-CMD5 2
17-114
COPIER > OPTION > BODY
Description
Title Dirt detection level adjustment (upon job completion) during ADF use
Purpose of use, When used This item is used when black streaks caused by dirt have occurred or when users have filed complaints.
Adjust the dirt detection level in the dirt detection correction control which is exercised when jobs
have been completed.
Precautions for use Increase the value when dirt fails to be detected, resulting in black streaks. However, if the value is
increased too much, even small-sized dirt of the kind which does not appear on the image will also be
detected, and the cleaning instruction screen may appear frequently.
Reduce the value if users complain because the cleaning instruction screen which appears when dirt is
detected is displayed frequently. Conversely, if the value is reduced too much, black streaks may
appear on the images.
Settings and adjustment 0 to 255
ranges When the value is reduced, it becomes harder for dirt to be detected.
When the value is increased, it becomes easier for even small-sized dirt to be detected.
When '0' is set, the correction control function used when dirt is detected is canceled.
Unit -
Value at time of shipment 80
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and If dirt is present, black streaks will appear on the images. For this reason, when dirt is detected, image
notes correction is executed to prevent the occurrence of black streaks.
Title Use it to switch the original reading position when the ADF is in use.
Purpose of use, When used Use it to set the original read position in the presence of dust on the glass surface.
Precautions for use -
Settings and adjustment 0: Scanning position of 2.5mm (3 points) and 6.5 mm (nomal position)
ranges 1: Fixed scanning position of 2.5mm (3 points)
2: Fixed scanning position of 6.5mm
Unit -
Value at time of shipment -
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
COPIER > OPTION > BODY
Description
Title Restriction on use of CRAM-MD5 authentication system during SMTP authentication
Purpose of use, When used Restrict the use of the CRAM-MD5 authentication system during SMTP authentication.
Precautions for use -
Settings and adjustment 0: Dependent upon the SMTP server
ranges 1: Not used
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and SMTP authentication has the specifications of SMTP (Simple Mail Transfer Protocol), a protocol used
notes for mail transmission, plus a user authentication function. When mail is received, the user account and
password are authenticated between the SMTP server and user, and mail transmission is permitted
only when the account and password have been authenticated.
CRAM-M5 (Challenge Response Authentication Mechanism - Message Digest 5) is a user
authentication system which provides encryption so that the password character string will not pass
through the network in its original form.
T-17-56
0019-9606