Canon iR3245 Series Service Manual page 563

Item Level Description
TR-PPR7 2 Title
Purpose
Note
Settings/Adjustment range
Unit
Amount of change per unit
Value at RAM clear/
adjustment at factory
shipment
Setting/Adjustment/
Operation method
Relevant Service Mode
Supplementary info/Memo
TR-PPR8 2 Title
Purpose
Note
Settings/Adjustment range
Unit
Amount of change per unit
Value at RAM clear/
adjustment at factory
shipment
Setting/Adjustment/
Operation method
Relevant Service Mode
Supplementary info/Memo
TR-ENV1 2 Title
Purpose
Note
Settings/Adjustment range
Unit
Amount of change per unit
Value at RAM clear/
adjustment at factory
shipment
Setting/Adjustment/
Operation method
Relevant Service Mode
Supplementary info/Memo
TR-ENV2 2 Title
Purpose
Note
Settings/Adjustment range
Unit
Amount of change per unit
Value at RAM clear/
adjustment at factory
shipment
Setting/Adjustment/
Operation method
Relevant Service Mode
Supplementary info/Memo
COPIER > ADJUST > HV-TR
Paper type item at secondary transfer offset adjustment
Paper type item at secondary transfer offset adjustment
-
1: plain paper, 2 thick paper, 3: envelope, 4: tracing paper, 5: transparency, 6: postcard, 7: label paper,
8: bond paper
-
-
1/No
1) Select the item to be highlighted to enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power switch.
COPIER > ADJUST > HV-TR > TR-TGT7
-
Paper type item at secondary transfer offset adjustment
Paper type item at secondary transfer offset adjustment
-
1: plain paper, 2 thick paper, 3: envelope, 4: tracing paper, 5: transparency, 6: postcard, 7: label paper,
8: bond paper
-
-
1/No
1) Select the item to be highlighted to enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power switch.
COPIER > ADJUST > HV-TR > TR-TGT8
-
Environment item at secondary transfer offset adjustment
-
Be sure to enter the value in ENV-TR: COPIER>DISPLAY>MISC>ENV-TR
1: A segment (low humidity)
2: B segment (normal temperature)
3: C segment (high temperature)
-
-
1/No
1) Select the item to be highlighted to enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power switch.
COPIER > ADJUST > HV-TR > TR-TGT1
-
Environment item at secondary transfer offset adjustment
-
Be sure to enter the value in ENV-TR: COPIER>DISPLAY>MISC>ENV-TR
1: A segment (low humidity)
2: B segment (normal temperature)
3: C segment (high temperature)
-
-
1/No
1) Select the item to be highlighted to enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power switch.
COPIER > ADJUST > HV-TR > TR-TGT2
-
Chapter 17
17-65