Copier > Display > Acc-Sts - Canon iR3245 Series Service Manual

Item Level
IOCS 1
SYSTEM 1
ROOT 1
FLASH 2
17.2.1.2 COPIER > DISPLAY > ACC-STS
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
COPIER > DISPLAY > ACC-STS
Item Level
FEEDER 1
SORTER 1
COPIER>DISPLAY>VERSION
Description
Title BIOS version
Purpose Displays the version of BIOS
Note -
Displays, settings and 2
adjustment ranges
Unit XX.YY
Appropriate guideline -
Related service modes -
Additional description and When checking the version of BIOS at a field
notes
Title Versions of Linux Kernel/driver/library
Purpose Displays the versions of Linux kernel/tool/driver/file
Note -
Displays, settings and (XX.YY)XX.YY XX.YY XX.YY XX.YY(KER TOOL DRIVER FILE) There is a space between
adjustment ranges versions to separate 4 versions.
Unit -
Appropriate guideline -
Related service modes -
Additional description and When displaying the versions of Linux kernel/tool/driver/file
notes
Title Displays the ROOT version
Purpose Check when displaying the ROOT version
Note -
Displays, settings and XX.YY
adjustment ranges
Unit N/A
Appropriate guideline -
Related service modes -
Additional description and This cannot be upgraded at a field.
notes
Title Displays the firmware version of new encryption board
Purpose Check the firmware version of new encryption board.
Note -
Displays, settings and XX.YY
adjustment ranges
Unit N/A
Appropriate guideline -
Related service modes -
Additional description and The firmware of new encryption board is written on FLASH and it cannot be upgraded in a field.
notes
Description
Title Display of the status of DADF connection
Purpose Check the status of DADF connection.
Note -
Displays, settings and 0: Not connected
adjustment ranges 1: Connected
Unit -
Appropriate guideline -
Related service modes -
Additional description and -
notes
Title Display of the status of connection of finisher and puncher
Purpose Check the status of connection of finisher and puncher.
Note -
Displays, settings and Sorter type 0: None, 1: Finisher, 2: Saddle finisher
adjustment ranges Punch type 0: None, 1: 2-hole, 2: 2/3-hole, 3: 4-hole (fr), 4: 4-hole (sw)
Unit -
Appropriate guideline -
Related service modes -
Additional description and -
notes
T-17-2
Chapter 17
0019-9272
17-19