Canon iR3245 Series Service Manual page 640

Chapter 17
Item Level
DATE-DSP 2
MB-CCV 2
CONTROL 1
B4-L-CNT 1
17-142
COPIER > OPTION > USER
Description
Title Switching of date/time display format
Purpose of use, When used Switch the date/time display which matches the format used in the country or region concerned.
Precautions for use -
Settings and adjustment 0: YYMM/DD
ranges 1: DD/MM'YY
2: MM/DD/YY
Unit -
Value at time of shipment The value differs depending on the destination.
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and The setting is reflected in the date setting sequence for the date/time setting accessed from system
notes control settings and in the sequence of the year/month/day printed on reports.
Title Restriction on control card users for mailboxes
Purpose of use, When used Restrict the control card users for mailboxes.
Precautions for use -
Settings and adjustment 0: OFF (users are not restricted)
ranges 1: ON (users are restricted)
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Switch for selecting whether to charge for PDL jobs
Purpose of use, When used Select whether to output the count pulses to the charge control unit when such a unit (a coin vender or
a control card made by another manufacturer) is connected.
Precautions for use -
Settings and adjustment 0: PDL jobs are not charged
ranges 1: PDL jobs are charged.
Set '1' to charge for PDL jobs.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Selection of countup when using B4 size sheets
Purpose of use, When used Select whether to count B4 size paper as large size paper or small size paper in soft counter 1 to 6.
Precautions for use -
Settings and adjustment 0: B4 size paper is counted as small size paper.
ranges 1: B4 size paper is counted as large size paper.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > OPTION > BODY > SC-L-CNT (Level 1)
Additional description and -
notes
T-17-67