Copier > Adjust > Fixing - Canon iR3245 Series Service Manual

Item Level
MF-A6R 1
MF-A4 1
17.4.1.13 COPIER > ADJUST > FIXING
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
FX-FL-SP 2
FX-FL-TH 2
COPIER > ADJUST > CST-ADJ
Description
Title Basic numeric value entry for paper width of A6R manual feed tray
Purpose - When executing RAM clear of DC controller PCB/replacing DC controller PCB
- In case of registering value when replacing paper width detection VR/for the first time
Note - Enter the value on service label when executing RAM clear of DC controller PCB/replacing DC
controller PCB.
- In case of registering value when replacing paper width detection VR/for the first time, be sure to
execute the following in Service Mode: COPIER>FUNCTION>CST>A6R.
In case of changing the setting value, be sure to note the setting value on main station service label.
Settings/Adjustment range 0 to 1024
Unit -
Amount of change per unit -
Value at RAM clear/ 175/Yes
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value, and then press OK key.
method 2) Turn OFF and then ON the main power switch.
Relevant Service Mode COPIER > FUNCTION > CST > A6R (Level 1)
Supplementary info/Memo -
Title Basic numeric value entry for paper width of A4 manual feed tray
Purpose - When executing RAM clear of DC controller PCB/replacing DC controller PCB
- In case of registering value when replacing paper width detection VR/for the first time
Note - Enter the value on service label when executing RAM clear of DC controller PCB/replacing DC
controller PCB.
- In case of registering value when replacing paper width detection VR/for the first time, be sure to
execute the following in Service Mode: COPIER>FUNCTION>CST>A4.
In case of changing the setting value, be sure to describe the setting value on main station service label.
Settings/Adjustment range 0 to 1024
Unit -
Amount of change per unit -
Value at RAM clear/ 791/Yes
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value, and then press OK key.
method 2) Turn OFF and then ON the main power switch.
Relevant Service Mode COPIER > FUNCTION > CST > A4 (Level 1)
Supplementary info/Memo -
COPIER > ADJUST > FIXING
Description
Title Fine adjustment value entry for fixing film speed when using plain paper
Purpose When executing RAM clear of DC controller PCB/replacing the PCB
Note Enter the value on service label
Settings/Adjustment range -3 to 3
Unit msec
Amount of change per unit -
Value at RAM clear/ 0/No
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
Relevant Service Mode -
Supplementary info/Memo -
Title Fine adjustment value entry for fixing film speed when using thick paper
Purpose When executing RAM clear of DC controller PCB/replacing the PCB
Note Enter the value on service label
Settings/Adjustment range -3 to 3
Unit msec
Amount of change per unit -
Value at RAM clear/ 0/No
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
Relevant Service Mode -
Supplementary info/Memo -
T-17-28
Chapter 17
0019-9290
17-73