Canon iR3245 Series Service Manual page 589

Item Level Description
MMI 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
MN-CON 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
CARD 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
ALARM 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Value at RAM clear
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
COPIER > FUNCTION > CLEAR
Clearing various settings in user mode
When clearing the following settings in user mode
- Backup data for the copy control panel
- Common settings backup data
- Various backup data excluding FAX
The setting is cleared after turning off/on the main power switch.
-
-
1) Select this item and press the OK key.
2) Turn off/on the main power switch.
-
-
-
-
Clearing RAM on the main controller PCB SRAM board
When clearing RAM on the main controller PCB SRAM board
- The contents of RAM is cleared after turning off/on the main power switch.
- When executing this item, the data on the SRAM board are all initialized.
- File management information on the hard disk is initialized; and then the image data on the hard disk
cannot be read.
- When executing this item, be sure to inform users that all images in BOX are lost and to get their
approval.
-
-
1) Make prints of the contents of service mode in COPIER > FUNCTION > MISC-P > P-PRINT.
2) Select this item and press the OK key. The machine is automatically restarted and 'Turn on the main
power switch again' is displayed.
3) Turn off/on the main power switch.
-
-
COPIER > FUNCTION > MISC-P > P-PRINT (level 1)
-
Clearing the data related to the card ID (department)
When clearing the card ID (department) data
The data related to the card ID is cleared after turning off/on the main power switch.
-
-
1) Select this item and press the OK key.
2) Turn off/on the main power switch.
-
-
-
-
Clearing alarm log
When clearing alarm log
The alarm log is cleared after turning off/on the main power switch.
-
-
-
1) Select this item and press the OK key.
2) Turn off/on the main power switch.
-
-
-
-
Chapter 17
17-91