Canon iR3245 Series Service Manual page 689

Display/setting/adjustment ranges: 00000000 to 99999999
When 99999999 is exceeded, the value returns to 00000000.
This item is used to check the target of replacing durable parts.
Be sure to clear the value of the relevant item after replacing parts.
Item Level
FIN-STPR 1
SADDLE 1
SDL-STPL 1
PUNCH 1
FN-BFFRL 1
<DRBL-2> items shown below are maintained in the DC controller PCB and the main controller PCB.
- Main controller PCB
DF-PU-RL, DF-FD-RL, DF-SP-BL, DF-F-BLT, DF-HNG-L, DF-HNG-R, DF-SP-M, DF-DL-RL, DF-DL-M, DF-TRL-U, PD-PU-RL, PD-SP-RL, PD-FD-RL
- DC controller PCB
SORT, FIN-STPR, SADDLE, SDL-STPL, PUNCH, FN-BFFRL, SDL-RL
When replacing the main controller PCB or DC controller PCB, execute the service mode COPIER>FUNCTION>MISC>P-PRINT and keep the printout.
COPIER > COUNTER > DRBL-2
Description
Title Finisher staple operation counter
Unit Count
Count-up specification -
Upper limit -
Additional description and -
notes
Title Finisher saddle operation counter
Unit Count
Count-up specification Large paper=1, Small paper=1
Upper limit -
Additional description and -
notes
Title Finisher saddle staple operation counter
Unit Count
Count-up specification -
Upper limit -
Additional description and -
notes
Title Punch operation counter
Unit Count
Count-up specification Large paper=1, Small paper=1
Upper limit -
Additional description and -
notes
Title Finisher buffer roller counter
Unit Count
Count-up specification Large paper=1, Small paper=1
Upper limit -
Additional description and -
notes
Chapter 17
17-191