Copier > Function > Misc-R; Copier > Function > Misc-P - Canon iR3245 Series Service Manual

Item Level
ERDS-DAT 1
KEY-CLR 2
17.5.1.11 COPIER > FUNCTION > MISC-R
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
SCANLAMP 1
17.5.1.12 COPIER > FUNCTION > MISC-P
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
COPIER > FUNCTION > CLEAR
Description
Title Clearing SRAM data of Embedded-RDS
Purpose of use To return the SCM value stored in SRAM of Embedded-RDS to the factory setting
Situation When executing version-up for bootable in an environment using E-RDS
Note - The contents of SRAM are cleared after pressing the OK key.
- Be sure to use this item when executing version-up of bootable in an environment using E-RDS. The
usage of SRAM in E-RDS varies according to the version; there occurs a data mismatch without
clearing SRAM.
- The data stored in the SRAM related to E-RDS are E-RDS ON/OFF, port number of the server,
Server SOAP URL, schedule of communication with the server (hourly intervals of obtaining the
data).
The value set in the following items are cleared.
- COPIER > FUNCTION > INSTALL > E-RDS
- COPIER > FUNCTION > INSTALL > RGW-PORT
- COPIER > FUNCTION > INSTALL > RGW-ADR
- COPIER > FUNCTION > INSTALL > COM-LOG
Displays, settings and -
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select this item and press the OK key.
method 2) If clearing is normally executed, OK is displayed.
OK/NG criteria -
Time required -
Related service modes COPIER > FUNCTION > INSTALL > E-RDS (level 1)
COPIER > FUNCTION > INSTALL > RGW-PORT (level 1)
COPIER > FUNCTION > INSTALL > RGW-ADR (level 1)
COPIER > FUNCTION > INSTALL > COM-LOG (level 1)
Additional description and -
notes
Title Clearing the encryption key of the HDD encryption board
Purpose When replacing the encryption key of the HDD encryption board (security kit)
Note This operation makes all data on HDD unavailable. Formatting HDD is required when turning off/on
the main power switch after this operation.
Displays, settings and -
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select this item and press the OK key.
method 2) If clearing is normally executed, OK is displayed.
3) Turn off/on the main power switch.
4) The processing at the time of installing the encryption board is activated and a new encryption key
is created.
OK/NG criteria Check to see that a new encryption key is created.
Time required -
Related service modes -
Additional description and -
notes
COPIER > FUNCTION > MISC-R
Description
Title Executing activation of the scanning lamp
Purpose When replacing the scanning lamp
Note -
Displays, settings and On operation: 'ACTIVE' displayed At completion: 'OK!' displayed
adjustment ranges
Unit -
Setting/Adjustment/Operation 1) Select this item.
method 2) Press the OK key to activate the scanning lamp for 3 sec.
OK/NG criteria It is OK if 'OK!' is displayed after 'ACTIVE' is displayed (blinking).
Time required 3 sec
Related service modes -
Additional description and -
notes
COPIER > FUNCTION > MISC-P
T-17-46
T-17-47
Chapter 17
0019-9302
0019-9303
17-93