Canon iR3245 Series Service Manual page 603

The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description
TEMPCON2 1 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
SENS-CNF 2 Title
Purpose of use
Purpose of use, When used
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
CONFIG 1 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
COPIER > OPTION > BODY
Switching of the fixing temperature mode (for plain paper, manual feed tray)
Switch the fixing temperature mode when plain paper is fed from the manual feed tray.
-
0: OFF
1: Priority is given to productivity. The controlled temperature is fixed at -10degC.
2: The controlled temperature is fixed at -6degC.
3: The controlled temperature is fixed at -3degC.
4: Priority is given to fixing performance. The controlled temperature is fixed at +3degC.
5: The controlled temperature is fixed at +6degC.
6: The controlled temperature is fixed at +10degC.
7: The controlled temperature is fixed at +15degC.
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
COPIER > OPTION > BODY > FIX-TEMP (Level 1)
This item can be used with the setting of FIX-TEMP.
Example)
When "FIX-TEMP=-6degC, TEMPCON2=-6degC" is set, the controlled temperature is offset at -
12degC.
Setting of the document detection sensor placement
This item is used when the RAM contents on the reader controller PCB have been cleared or after the
PCB has been replaced. The setting of document detection size is selected in accordance with the
document sensor placement.
-
0: AB type
1: Inch type
2: A type
-
Varies depending on the destination / 0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
In the case of machines destined for inch or A type manufacturers, be sure to set "1" (Inch type) or "2"
(A type) after the RAM contents on the reader controller PCB have been cleared or after the PCB has
been replaced.
-
-
Switching of country/region, language, destination and paper size type
Select the multiple system software applications on the hard disk, and switch the country/region,
language, destination and paper size type.
-
XXYYZZAA
XX: Country/region (example: JP = Japan)
YY (*): Language (example: ja = Japanese)
ZZ (*): Destination (example: 00 = CANON)
AA: Paper size type (00 = AB type, 01 = Inch type, 02 = A type, 03 = Inch/AB type)
* The setting cannot be changed.
-
Varies depending on the destination.
1) Select <CONFIG>.
2) Select the desired item.
3) Press the +/- keys. Each time one of the keys is pressed, the setting is switched.
4) Display the desired setting, and press the OK key.
5) Set the main power switch to OFF and back to ON.
-
-
Chapter 17
17-105