Fixing System; Points To Note When Installing The Fixing Heater - Canon NP6330 Service Manual

CHAPTER 11 TROUBLESHOOTING
E. Fixing System
1

Points to Note When Installing the Fixing Heater

a. Do not touch the surface of the heater.
b. One of the terminals (lead wire
terminals of the main heater are fastons
<Main Heater>
The longer lead wire must be at the front of the copier.
<Sub Heater>
The round terminal must be at the rear of the copier. The fastons must be at the front
of the copier.
c. Insert the main heater to the right side (pick-up side) and the sub heater to the left
side (delivery side) when viewing from the front of the fixing assembly.
11-40
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
) of the sub heater is a round terminal
Figure 11-248
Figure 11-249
Sub heater
(delivery side)
Figure 11-250
.
Main heater
(pick-up side)
Upper fixing roller
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
. Both