Canon iR3245 Series Service Manual page 593

LBL-PRNT 1 Title
Purpose
Situation
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
PRE-EXP 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
D-PRINT 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
ENV-PRT 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
PJH-P-1 1 Title
Purpose
Note
Displays, settings and
adjustment ranges
Unit
Setting/Adjustment/Operation
method
OK/NG criteria
Time required
Related service modes
Additional description and
notes
Making prints for service labels
To make prints for the service labels
-
-
-
-
1) Set the A4/LTR paper on the cassette 1.
2) Select this item.
3) Press the OK key to make prints.
It is OK if 'OK!' is displayed after 'ACTIVE' is displayed (blinking).
Approx. 55 sec
-
Output starts in approx. 15 sec.
Checking activation of the pre-exposure lamp (LED)
To check the activation of the pre-exposure lamp (LED)
-
On operation: 'ACTIVE' displayed At completion: 'OK!' displayed
-
1) Press (highlight) the item.
2) Press the OK key to execute each operation for several sec and stop automatically (activated).
It is OK if 'OK!' is displayed after 'ACTIVE' is displayed (blinking).
Approx. 30 sec
-
If activation of the pre-exposure lamp causes a fault in the photosensitive drum, turn the drum.
Making prints for service mode (DISPLAY)
To make prints for service mode (DISPLAY)
Mode to output only the items on DISPLAY (excluding printouts with P-PRINT/LBL-PRINT/HIST-
PRINT and ALARM).
-
-
Select (highlight) the item and press the OK key.
It is OK if 'OK!' is displayed after 'ACTIVE' is displayed (blinking).
Approx. 45 sec
-
-
Output of log of the temperature and humidity inside the machine/surface temperature of the fixing
roller
To obtain the information on previous temperature inside the machine/fixing temperature in the case
of trouble analysis
-
-
-
Select (highlight) the item and press the OK key.
It is OK if 'OK!' is displayed after 'ACTIVE' is displayed (blinking).
Approx. 30 sec
-
-
Making prints for print job history with detailed information (for 100 jobs)
To make prints for print job history stored in the copier with detailed information for the latest 100 jobs
-
-
-
Select (highlight) the item and press the OK key.
It is OK if 'OK!' is displayed after 'ACTIVE' is displayed (blinking).
-
-
- Make prints for the print job history with the detailed information not displayed/output on the report
print of the job history screen and the print job history in System Monitor > Print > Log > Printer.
- The latest 100 print jobs are output; If the number of print job history recorded is less than 100, all
recorded jobs are output.
- The only difference from PJH-P-2 is the number of job history.
Chapter 17
17-95