Fax Unit Cover; Removing The Fax Unit Cover; Control Panel Inside Frame; Before Removing The Control Panel Inside Frame - Canon iR3245 Series Service Manual

Hide thumbs Also See for iR3245 Series:
Table of Contents

Advertisement

Chapter 10

10.5.1.23 FAX Unit Cover

10.5.1.23.1 Removing the FAX Unit Cover

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover [1]. (page 10-17)[Removing the Upper
Rear Cover]
2) Remove the FAX unit for 2 lines or the FAX unit for 2/3 lines as needed.
For details, refer to the parts replacement procedure 'Removing the Fax
Unit' in the service manual for the Super G3 2nd/3rd Line FAX Board-
AC1 or that for the Super G3 2nd Line FAX Board-AC1.
3) Remove the FAX unit cover [1].
- 4 screws [2]
[2]
[1]
[2]
[4]
Points to Note At Installing
Be sure to hook the FAX unit cover [1] on the 2 claws [3], fit the 2 locations
of emboss [4], and then tighten the screws.

10.5.1.24 Control Panel Inside Frame

10.5.1.24.1 Before Removing the Control Panel Inside
Frame
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the control panel unit. (page 10-25)Reference[Removing the
Control Panel Unit]
2) Remove the control panel lower cover. (page 10-21)Reference[Remov-
ing the Control Panel Lower Cover]
3) Remove the control panel USB PCB. (Only for the machine equipped with
the control panel USB port.) (page 10-29)Reference[Removing the
Control Panel USB PCB]

10.5.1.24.2 Removing the Control Panel Inside Frame

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
10-20
[3]
[4] [2]
[2]
F-10-39
1) Remove the following parts.
- 2 flat cables [2, 4]
- 1 connector [6] (removing it while pressing the edges [5] in the direction
shown by the arrows)
- 1 guide [7] (removing the harness [9])
0019-4151
- 1 edge saddle [8] (removing the harness [9])
- 2 connectors [10]
- 4 wire saddle [11] (removing the harness [12])
Be sure to remove the stoppers [1, 3] to the direction of the arrow. The 2
stoppers [1, 3] are moved to the different directions, respectively.
[8]
[6]
0019-8376
2) Remove the 2 screws [2] and remove the plate [1].
[1]
0019-8306
[9]
[7]
[5]
[10]
[12]
[11]
F-10-40
[2]
[2]
F-10-41
[3]
[4]
[1]
[2]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3225 series3230 series3235 series

Table of Contents