Canon iR3245 Series Service Manual page 644

Chapter 17
Item Level
PCL-COPY 2
CNT-SW 1
REMPNL 1
17-146
COPIER > OPTION > USER
Description
Title Binder control mode of COPIES command for PCL
Purpose of use, When used Make the COPIES command control method when Canon's PCL is used identical to the COPIES
command control method used in the PCLs of other manufacturers.
Precautions for use -
Settings and adjustment 0: Control is exercised on a page-by-page basis in accordance with the COPIES command value
ranges specified on each page.
1: The COPIES command value specified on page 1 is treated as the binding number, and the value of
the COPIES command for the subsequent pages is canceled. (In the sorting mode only; in non-sorting
modes, control is the same as with the '0' setting.)
2 to 65535: For further expansion
'0' is the control method for Canon's PCL. To make this identical to the control method used in the
PCLs of other manufacturers, use the '1' setting.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Selection of default display item for charge counter
Purpose of use, When used Select the default display item for the charge counter which is to be displayed on the counter status
check screen. (used only for machines for the Japanese market)
Precautions for use -
Settings and adjustment Japan
ranges 0: Counter 1 - total 1: 101
1: Counter 1 - total 2: 102
Counter 2 - copy (total 2): 202
Counter 3 - total A2: 127
2: Not used
UL
0: Counter 1 - total 1: 101
Counter 2 - total (large): 103
Counter 3 - copy (total 1): 201
Counter 4 - copy (large): 203
1: Counter 1 - total 2: 102
Counter 2 - copy (total 2): 202
2: Not used
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Use it to select whether to use the remote panel function
Purpose of use, When used Selects whether to use the remote panel function, which enables a user to operate a device using a PC
in the same manner as the LCD panel.
Precautions for use -
Settings and adjustment 0: Do not use remote panel function.
ranges 1: Use remote panel function.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and -
operation procedures
Related service modes -
Additional description and -
notes