Canon iR3245 Series Service Manual page 621

The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description
WUEV-INT 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
WUEV-POT 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
WUEV-RTR 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
SJB-UNW 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
COPIER > OPTION > BODY
Sleep notice interval setting
Set the sleep notice interval when giving sleep notice.
Valid only when COPIER > OPTION > BODY > WUEV-SW is set to '0'
60 to 65535
Seconds
600
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
COPIER > OPTION > BODY > WUEV-SW (Level 2)
-
Sleep notice destination port number setting
Set the port number on the sleep notice destination PC when giving sleep notice.
Valid only when COPIER > OPTION > BODY > WUEV-SW is set to '0'
1 to 65535
-
11427
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
COPIER > OPTION > BODY > WUEV-SW (Level 2)
-
Sleep notice range setting
Set the maximum number of routers to the sleep notice destinations through which the sleep notice is
to be given.
Valid only when COPIER > OPTION > BODY > WUEV-SW is set to '0'
1 to 254
-
3
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
COPIER > OPTION > BODY > WUEV-SW (Level 2)
-
Switch for selecting number of reserved print jobs among secure print jobs
Select the upper limit for the number of reserved jobs among the secure print jobs.
-
0: 50 jobs
1: 90 jobs
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
-
Chapter 17
17-123