Removing The Pci Bus Expansion Pcb; Voice Operation Pcb; Removing The Voice Operation Pcb - Canon iR3245 Series Service Manual

Chapter 4

4.7.9 Voice Operation PCB

4.7.9.1 Removing the Voice Operation PCB

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the terminal [1] of the cable and the 3 wire saddles [2].
[2]
2) Remove the upper rear cover. (page 10-17)[Removing the Upper Rear
Cover]
3) Remove the wireless LAN PCB as needed. (page 4-15)[Removing the
Wireless LAN PCB]
4) Remove the IPSec PCB as needed. (page 4-16)[Removing the IPSec
PCB]
5) Remove the PCI bus expansion PCB unit as needed. (page 4-17)[Re-
moving the PCI Bus Expansion PCB]
6) Remove the voice operation PCB unit [1].
- 2 screws [2]
- 2 screws [3]
[1]
4-18
[1]
F-4-38
[2]
[3]
F-4-39
7) Remove the voice operation PCB [1] from the plate [2].
- 2 hex nut screws [3]
- 2 washers [4]
0019-3208
[4]
[3]
[1]
[2]
[3] [4]
F-4-40