Copier > Option > User (5/7) - Canon iR3245 Series Service Manual

Chapter 17
Item Level
PTJAM-RC 2
17.6.1.20 COPIER > OPTION > USER (5/7)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
PDL-NCSW 2
SLP-SLCT 2
17-150
COPIER > OPTION > USER
Description
Title Automatic resumption of printing switch for PDL print jams
Purpose of use, When used Set whether to automatically resume printing after releasing a jam when jamming has occurred during
PDL printing.
Precautions for use -
Settings and adjustment 0: OFF (printing is not automatically resumed.)
ranges 1: ON (printing is automatically resumed.)
Unit -
Value at time of shipment 1
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
COPIER > OPTION > USER
Description
Title PDL print job card control mode setting
Purpose of use, When used Place the PDL print jobs under the control of the card reader.
Precautions for use -
Settings and adjustment 0: PDL printing is performed regardless of whether a card is inserted.
ranges 1: PDL printing is not performed when a card has not been inserted or the department ID does not
match; PDL printing is performed when a card has been inserted and when the department ID matches.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Network-type application use selector switch
Purpose of use, When used Specific packets must be received for the machine to be reset from sleep mode 3 via the network. Since
the existing network-type applications (NetSpot Accountant and imageWARE) do not send these
packets, the machine cannot be reset via the network when its operation has transferred to sleep mode
3.
Precautions for use - This must not be used for regular servicing.
- When '1' is set, operation is no longer transferred to sleep mode 3 (2W power) so this is
disadvantageous in terms of minimizing the power consumption.
Settings and adjustment 0: Not used (operation can transfer to sleep mode 3)
ranges 1: Used (operation cannot transfer to sleep mode 3)
Set this item to '1' if the machine is to be allowed to be reset from the sleep mode via the network.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
T-17-70
0019-9619