Copier > Option > Body (15/15) - Canon iR3245 Series Service Manual

Chapter 17
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
SPDALDEL 2
17.6.1.15 COPIER > OPTION > BODY (15/15)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
NCONF-SW 1
ABK-TOOL 1
IKEINTVL 1
17-132
COPIER > OPTION > BODY
Description
Title Initialization of the SPD value
Purpose of use, When used This item is used to initialize all SPD values when mismatches have occurred in the controlled SPD
values at the time of increasing the IPSec board.
Precautions for use -
Settings and adjustment 0: OFF 1: ON
ranges
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and SPD values are controlled when the IPSec board is used. When mismatches have occurred in SPD
notes values, the machine can usually recover only by executing SRAM clear. By using this item, SPD
values can be initialized without executing SRAM clear.
COPIER > OPTION > BODY
Description
Title ON/OFF switch of the Network Configurator function
Purpose of use, When used This item is used when the user asks for the item to be provided. This item is used to prevent attack
from a remote machine via network when the Network Configurator function is not needed.
Precautions for use -
Settings and adjustment 0: OFF 1: ON
ranges
Unit -
Value at time of shipment 1
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and The Network Configurator function is used to communicate with NetSpot Device Installer, etc. and
notes the network settings can be changed from the remote machine.
Title Switch to permit an access from the Address Book Maintenance Tool
Purpose of use, When used This item is used to permit import from the Address Book Maintenance Tool (only used in Japan)
Precautions for use -
Settings and adjustment 0: OFF 1: ON
ranges
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and The Address Book Maintenance Tool is provided by CMJ.
notes
Title IKE retry interval
Purpose of use, When used Set a retry interval for a case when an IKE packet was transmitted but no response was made from the
receiver.
Precautions for use -
Settings and adjustment 1 to 30
ranges
Unit -
Value at time of shipment 10
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
T-17-64
0019-9614