Copier > Option > Lcns-Tr - Canon iR3245 Series Service Manual

Chapter 17
Item Level
TR-SW1/2/3/4/5 1
17.6.1.28 COPIER > OPTION > LCNS-TR
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
Transfer Invalidation Procedure:
1) Select the item (ST-XXXX), and highlight it.
2) Enter '0', and press the OK key.
The transfer license key (24-digit) is indicated to TR-XXXX.
ST-SEND 2
TR-SEND 2
ST-ENPDF 2
17-166
COPIER > OPTION > COMBO
Description
Title Setting for weak bias at the lead edge of transfer destination
Purpose of use, When used -
Precautions for use Register the following installation to this switch.
COPIER>OPTION>COMBO>PPR-SLCT/ MOD-SLCT/ENV-SLCT
Setting, adjustment and 0: OFF 1: ON
operation procedures
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Use necessary combinations of the three service mode items mentioned above.
operation procedures 2) Select from TR-SW1 through 5.
3) Set '1' for the selected switch.
* When these requirements are satisfied, weak bias at the lead edge of transfer destination becomes
enabled.
** When setting '1' for any of TR-SW1 through 5 and selecting from TR-SW1 through 5, the setting
of the selected switch is displayed in COPIER > OPTION > COMBO > PPR-SLCT / MOD-SLCT /
ENV-SLCT.
Weak bias at the lead edge of transfer destination becomes enabled when the settings mentioned above
and below are made.
COPIER > ADJUST > HV-TR > (1)TR-TP-TM (application time) / (2)TR-TP-LV (application level)
Related service modes COPIER > OPTION > COMBO > PPR-SLCT (Level 1)
COPIER > OPTION > COMBO > MOD-SLCT (Level 1)
COPIER > OPTION > COMBO > ENV-SLCT (Level 1)
COPIER > ADJUST > HV-TR > TR-TP-TM (Level 1)
COPIER > ADJUST > HV-TR > TR-TP-LV (Level 1)
Additional description and -
notes
COPIER > OPTION > LCNS-TR
Description
Title Displaying the installation status of the SEND function upon the transfer invalidation
Purpose of use, When used Display the installation status of the SEND function.
Precautions to use -
Settings and adjustment 0: Not installed
ranges 1: Installed
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Additional description and -
notes
Title Obtaining the transfer license key of the SEND function upon the transfer invalidation
Purpose of use, When used This mode is used when replacing the HDD, or when changing the machine. Display the transfer
license key of the SEND function.
Precautions to use -
Settings and adjustment Transfer license key: 24-digit
ranges
Value at time of shipment -
from factory/Value
established when RAM is
cleared
Additional description and -
notes
Title Displaying the installation status of the SEND encrypted PDF transmission function upon the transfer
invalidation
Purpose of use, When used Display the installation status of the SEND encrypted PDF transmission function.
Precautions to use -
Settings and adjustment 0: Not installed
ranges 1: Installed
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Additional description and -
notes
T-17-78
0019-9627