Installation Procedure - Canon iR3245 Series Service Manual

2.17.4 Installation Procedure

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1. Installation Procedure
1) Remove the face plate [1] at the rear left side. (Do not use the removed
face plate.)
- 2 screws [2]
[1]
2) Install the wireless LAN board [1]
- 2 screws [2] (Use the screw removed in step 1.)
[1]
3) Remove the antenna fixing tape [1] from the sheet and affix it to the MFP
antenna [2].
MEMO:
Keep the 2 remaining tapes in the safe place for later use.
[1]
[2]
F-2-209
[2]
F-2-210
[2]
F-2-211
4) Install the MFP antenna [1] at the position shown in the figure.
0019-0005
The installing position shown in the figure is recommended.
Do not install it at positions that may affect the operating portions of the
host machine or hinder opening/closing operations.
5) Remove the covers [1] of the 4 cord guides.
6) Remove the release papers of the 4 cord guides [1] and install them to the
positions shown in the figure.
[1]
7) Route the cable [1] of the MFP antenna through the 4 cord guides [2].
F-2-212
[1]
F-2-213
[1]
F-2-214
Chapter 2
[1]
2-49