Vertical Path Roller; Feeding Roller - Canon iR3245 Series Service Manual

Chapter 8
1) Free the harness [2] from the 1 wire saddle [3].
- 1 connector [1]
- 2 reuse-bands [4]
2) Open the 3 way unit [1] and remove the 2 screws [2].
3) Close the 3 way unit [1] and remove the 2 screws [3].
4) Remove the 3 way unit [1].

8.8.21 Feeding Roller

8.8.21.1 Removing the Pickup Roller/Feed Roller/
Separation Roller
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the cassette.
2) Open the right cover (in the case of separation roller).
8-42
F-8-82
F-8-83
F-8-84
3) Hold the tab to remove the pickup roller [1]/feed roller [2]/separation roll-
er [3].
Point to note when replacing the feed roller/separation roller
The color of the feed roller/separation roller (roller core) of this machine is
black.

8.8.22 Vertical Path Roller

8.8.22.1 Before Removing the Vertical Path Roller
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the rear right cover. (page 10-16)Reference[Removing the
Rear Right Cover]
2) Release the right cover. (page 10-36)Reference[Releasing the Right
Cover]
3) Remove the right cover (lower front). (page 10-16)Reference[Remov-
ing the Right Cover (Lower Front)]
4) Remove pickup unit 1. (page 8-30)Reference[Removing the Pickup
Unit 1]
5) Remove pickup unit 2. (page 8-30)Reference[Removing the Pickup
Unit 2]
6) Remove the sensor mounting plate. (page 8-31)Reference[Removing
the Sensor Mounting Plate]
8.8.22.2 Removing the Vertical Path Roller
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Release the claw [A] at the rear side to remove the gear [1] and the bushing
[2].
0018-9872
F-8-85
F-8-86
0018-9873
0018-9874