Setting the Timer
You can specify the copier's Timer Settings to meet your specific needs.
Changing the Auto Clear Time
If the copier is left untouched for a specified period of time after a Copy job or a key input, the
touch panel display will return to the Basic Features screen. This is called the Auto Clear
function.
NOTE
•
The default setting is "2 min"..
1
Display the required screen as follows:
Press
2
Enter the desired time period using [-] and [+]; then press [OK].
The Auto Clear Time settings are from 0 to 9 minutes (in 1-minute increments).
When "0" is selected, the Auto Clear function is not specified.
3
Press [Done].
(Additional Functions) → [Timer Settings] → [Auto Clear Time]
2-33
Setting the Timer
2